Could somebody please post.....

**travis_118** · February 25th, 2002, 12:21 AM

a write up, website, picture, disscussion, or something, on how to wire JDM power windows. Thanks in advance.

------------------
http://home.bendcable.com/travis118/
ZC in the Works....

**SiRReal Racer** · February 25th, 2002, 01:27 AM

Sorry for the delay but here it is!!!! I remember someone asking me and i told them i would post it but i've been sluffing so here it is.

Parts needed, will be one passenger regulator with motor, driver regulator with motor, a switch per window. Lots of wire and two automotive 5 prong relays (the ones used for car alarms) per window. Radio shack part # 980-0122

Getting the regulator with motor to fit is pretty self explanatory so i'll just skip ahead to the wiring.

To get power to the windows what will need to be done is:
Each relay has a number for each prong. So i'll just list what needs to be connected for each.

85 = to switch
86 = ground
87a = ground
87 = 12v+
30 = one of the wire on the motor.

So what needs to be done for the other relay is the same thing but just the other wire of the same motor at 30.

Now for the switch all switches are different but pretty similar so what needs to be done is figure out which prongs go up and go down and which one needs power, so then you can connect the wires. Usually just messing around and switching the connections around works best. But for the power to the switch it's up to you as if you want your windows to work with the key in or out. So if you only want it to work when your car is on then you connect it to a ignition 12v+, but if you want it to work with your car off then connect it directly to the battery.

Any more questions or if something is confusing please post it and i'll do my best to clear things up!!!!!

------------------
14.4 (N/A)
Representin'
SiRReal (SeRReal) Racin'